Wear Parts Supply in India and Export Markets

Wear Parts Supply from an Indian Foundry

Melco Precisions Pvt Ltd manufactures shredder hammers and crusher blow bars for distributors, importers and trading partners who resell into their own markets. We welcome domestic enquiries from India. The USA and Australia are our primary export markets. Send your machine details, part drawing, quantity and receiving destination. Minimum order, production lead time and packing are confirmed with quotation.

Request an Export Quote USA buyer information Australia buyer information

Review the Manufacturer and the Order Specification

Melco Precisions Pvt Ltd manufactures wear castings in Bhiwadi, Rajasthan, India, with 40+ years of manufacturing experience. View our company information and ISO certificate, then agree the requirements for your specific part.

  • Fitment: identify the approved drawing revision, dimensions, units, tolerances and part markings.
  • Material: specify the requested grade and inspection requirements. Agree hardness test locations and acceptance limits where applicable.
  • Records: request confirmation of the material certificate, dimensional inspection, batch identification and any pre-dispatch review needed for your order.

The company certificate does not replace part-specific inspection records. Documentation scope, minimum order, production lead time and packing are confirmed with quotation.

What You Can Stock

Shredder wear parts

Shredder hammers, ELV shredder hammers, dual hardness hammers, and shredder wear parts including grates, anvils, doors and pin protectors.

Crusher wear parts

HSI impactor blow bars, blow bars for Hazemag, SBM, Rubble Master and McCloskey, blow bars for Stedman, Eagle, Metso and Astec, VSI impellers and anvils, ball mill liners and apron feeder parts.

Parts we do not list

If a part is not shown on this site, it is worth asking. Much of what we produce is made to customer drawings rather than to a catalogue. See custom manufacturing.

Starting a Supply Relationship

1. Send the part details

A drawing, a sample, or photographs of a worn part with key dimensions. Include the machine make and model, the material grade if known, and the quantity you expect to move.

2. Receive a quotation

You will get grade recommendation, price, lead time and any pattern or tooling cost that applies before production begins.

3. Trial order

Most partnerships start with a trial quantity so you can verify fitment and wear performance in your own market before committing to volume.

4. Repeat supply

Once a pattern exists and a grade is proven, repeat orders run against the same records, with drawing revisions and inspection requirements reviewed for each order.

What to Send for a Shredder Hammer or Blow Bar Quote

Send the part details below with your required quantity and destination. If a measurement or grade is unknown, identify it for review rather than estimating it.

Shredder Hammers

  • Shredder make and model, part reference and drawing revision, if available.
  • Hammer dimensions, pin-hole diameter, pin-to-face dimension and piece weight, with units clearly stated.
  • Feed material, current hammer grade if known, and photographs showing wear, breakage or pin-hole condition.
  • Trial or set quantity and any balance, weight matching or inspection requirements.

View shredder hammer options and the trial order acceptance checklist.

HSI Crusher Blow Bars

  • Crusher make and model, rotor or part reference, and an approved drawing or dimensioned photographs.
  • Bar dimensions, mounting profile, locating features and piece or set quantity.
  • Feed type, approximate feed size, abrasiveness and known tramp-metal or uncrushable contamination.
  • Current material grade if known, wear photographs and the inspection requirements for the replacement.

View HSI blow bars and the guide to comparing blow bar supplier quotes.

Delivery and Commercial Details

Include the receiving country, port or delivery address, required date and preferred shipping basis. Ask for tooling costs, freight scope, packing and requested import documents to be identified in the quotation. Minimum order, production lead time and available terms are confirmed with quotation.

Photographs of a worn component help identify it; final fitment must be reviewed against approved dimensions. Send Part Details for Review

India and Export Markets

Domestic market: India. View buyer information for India.

Primary focus: USA and Australia.

Other Export Destinations

Choose your destination to prepare an enquiry for shredder hammers, blow bars or other wear castings.

For Congo enquiries, specify the Democratic Republic of the Congo or the Republic of the Congo and the delivery location.

Enquiries from other destinations are welcome. Send the receiving country and port, including the full destination name where needed. Minimum order, production lead time, packing, shipping basis and documentation scope are confirmed with quotation.

Wear Parts for Buyers in India

Indian recycling plants, quarries, cement plants and distributors can enquire about shredder hammers, impact crusher blow bars, mill liners and other cast wear parts.

Send the machine model, part reference or drawing, material requirement and quantity. Include the delivery city, state and PIN code, plus any invoicing or inspection requirements. Minimum order, production lead time, packing and delivery scope are confirmed with quotation.

Request a Quote for India

Wear Parts for USA Plants and Importers

Source manganese and alloy steel shredder hammers, HSI impact crusher blow bars and related cast wear parts from our Indian foundry. Identify the machine and part reference before comparing grades or prices.

  • Mark drawing dimensions clearly as inches or millimetres and identify the drawing revision.
  • Include the part number, set quantity, operating feed and photographs of the worn component.
  • Provide the receiving port or city, state and ZIP code so the quotation can define its delivery scope.

Minimum order, production lead time, packing and shipping terms are confirmed with quotation. Request a USA Export Quote

Wear Parts for Australian Plants and Importers

Discuss metal shredder wear parts, crusher wear parts and ball mill liners for recycling, quarrying and mineral processing. Replacement fitment and material are reviewed for the machine and operating duty.

  • Provide the part drawing or sample details with dimensions and weight units clearly identified.
  • Describe feed abrasiveness, impact or contamination, current grade and observed wear or breakage.
  • Include the receiving port or delivery city, state and postcode, plus any requested inspection or packing details.

Minimum order, production lead time, packing and shipping terms are confirmed with quotation. Request an Australia Export Quote

For Distributors and Importers

Practical guides written for the supply side of this business rather than for plant operators:

Distributor Questions

Do you supply distributors and traders, or only end users?

Both. We supply quarries, cement plants and recycling operators directly, and also distributors, importers and traders who resell into their own markets under their own commercial terms.

Which parts move best for a distributor holding stock?

Start with the machines your customers operate and their replacement demand. Shredder hammers and blow bars are wear consumables; the right stock mix depends on installed equipment, grade requirements and replenishment lead time.

Can you manufacture parts for machines we already supply?

Send the machine model, part reference and an approved drawing or sample details. We review geometry, material and tooling requirements before confirming whether the part can be manufactured. A brand reference alone does not establish fitment.

What quality documentation is supplied?

State the material certificate, hardness test locations, drawing checks and any witness inspection you require. The available records, acceptance criteria and documentation scope are confirmed with quotation before an order is placed.

How does a first order usually work?

Most supply relationships begin with a trial quantity so fitment and wear performance can be confirmed in service before committing to volume. Send the machines your customers run and we will advise which parts to trial first.

Do you quote FOB or CIF?

State your preferred shipping basis, destination country and receiving port. The available shipping basis, freight scope and responsibilities are confirmed with quotation.

Get a Quote

Send the parts you need, machine models, quantity and destination country. Minimum order, production lead time, packing and available shipping terms are confirmed with quotation.

Have drawings or worn-part photographs? Email them to achandra@melcocastings.com or choose Submit via WhatsApp below, then attach the files in WhatsApp. Include the machine make/model, quantity and destination country.

Fields marked * are required. Phone, company and destination are optional.

Country code is suggested from your device settings. You can change it.
For India, add the delivery city, state and PIN code. For exports, add the receiving port or delivery location. Other destinations are welcome.

Choose email to send your requirement to our team. If you choose WhatsApp, continue there and press Send to complete your message.

Enquire

Request a quotation

Tell us the part, machine model and quantity you need.