Wear Parts Supply in India and Export Markets
Wear Parts Supply from an Indian Foundry
Melco Precisions Pvt Ltd manufactures shredder hammers and crusher blow bars for distributors, importers and trading partners who resell into their own markets. We welcome domestic enquiries from India. The USA and Australia are our primary export markets. Send your machine details, part drawing, quantity and receiving destination. Minimum order, production lead time and packing are confirmed with quotation.
Request an Export Quote USA buyer information Australia buyer information
Review the Manufacturer and the Order Specification
Melco Precisions Pvt Ltd manufactures wear castings in Bhiwadi, Rajasthan, India, with 40+ years of manufacturing experience. View our company information and ISO certificate, then agree the requirements for your specific part.
- Fitment: identify the approved drawing revision, dimensions, units, tolerances and part markings.
- Material: specify the requested grade and inspection requirements. Agree hardness test locations and acceptance limits where applicable.
- Records: request confirmation of the material certificate, dimensional inspection, batch identification and any pre-dispatch review needed for your order.
The company certificate does not replace part-specific inspection records. Documentation scope, minimum order, production lead time and packing are confirmed with quotation.
What You Can Stock
Shredder wear parts
Shredder hammers, ELV shredder hammers, dual hardness hammers, and shredder wear parts including grates, anvils, doors and pin protectors.
Crusher wear parts
HSI impactor blow bars, blow bars for Hazemag, SBM, Rubble Master and McCloskey, blow bars for Stedman, Eagle, Metso and Astec, VSI impellers and anvils, ball mill liners and apron feeder parts.
Parts we do not list
If a part is not shown on this site, it is worth asking. Much of what we produce is made to customer drawings rather than to a catalogue. See custom manufacturing.
Starting a Supply Relationship
1. Send the part details
A drawing, a sample, or photographs of a worn part with key dimensions. Include the machine make and model, the material grade if known, and the quantity you expect to move.
2. Receive a quotation
You will get grade recommendation, price, lead time and any pattern or tooling cost that applies before production begins.
3. Trial order
Most partnerships start with a trial quantity so you can verify fitment and wear performance in your own market before committing to volume.
4. Repeat supply
Once a pattern exists and a grade is proven, repeat orders run against the same records, with drawing revisions and inspection requirements reviewed for each order.
What to Send for a Shredder Hammer or Blow Bar Quote
Send the part details below with your required quantity and destination. If a measurement or grade is unknown, identify it for review rather than estimating it.
Shredder Hammers
- Shredder make and model, part reference and drawing revision, if available.
- Hammer dimensions, pin-hole diameter, pin-to-face dimension and piece weight, with units clearly stated.
- Feed material, current hammer grade if known, and photographs showing wear, breakage or pin-hole condition.
- Trial or set quantity and any balance, weight matching or inspection requirements.
View shredder hammer options and the trial order acceptance checklist.
HSI Crusher Blow Bars
- Crusher make and model, rotor or part reference, and an approved drawing or dimensioned photographs.
- Bar dimensions, mounting profile, locating features and piece or set quantity.
- Feed type, approximate feed size, abrasiveness and known tramp-metal or uncrushable contamination.
- Current material grade if known, wear photographs and the inspection requirements for the replacement.
View HSI blow bars and the guide to comparing blow bar supplier quotes.
Delivery and Commercial Details
Include the receiving country, port or delivery address, required date and preferred shipping basis. Ask for tooling costs, freight scope, packing and requested import documents to be identified in the quotation. Minimum order, production lead time and available terms are confirmed with quotation.
Photographs of a worn component help identify it; final fitment must be reviewed against approved dimensions. Send Part Details for Review
India and Export Markets
Domestic market: India. View buyer information for India.
Primary focus: USA and Australia.
Other Export Destinations
Choose your destination to prepare an enquiry for shredder hammers, blow bars or other wear castings.
- Request a quote for South Africa
- Request a quote for Zambia
- Request a quote for Congo
- Request a quote for Ghana
- Request a quote for Russia
- Request a quote for Spain
- Request a quote for United Kingdom
- Request a quote for Germany
- Request a quote for UAE
- Request a quote for Yemen
- Request a quote for Morocco
- Request a quote for Algeria
- Request a quote for Tunisia
For Congo enquiries, specify the Democratic Republic of the Congo or the Republic of the Congo and the delivery location.
Enquiries from other destinations are welcome. Send the receiving country and port, including the full destination name where needed. Minimum order, production lead time, packing, shipping basis and documentation scope are confirmed with quotation.
Wear Parts for Buyers in India
Indian recycling plants, quarries, cement plants and distributors can enquire about shredder hammers, impact crusher blow bars, mill liners and other cast wear parts.
Send the machine model, part reference or drawing, material requirement and quantity. Include the delivery city, state and PIN code, plus any invoicing or inspection requirements. Minimum order, production lead time, packing and delivery scope are confirmed with quotation.
Wear Parts for USA Plants and Importers
Source manganese and alloy steel shredder hammers, HSI impact crusher blow bars and related cast wear parts from our Indian foundry. Identify the machine and part reference before comparing grades or prices.
- Mark drawing dimensions clearly as inches or millimetres and identify the drawing revision.
- Include the part number, set quantity, operating feed and photographs of the worn component.
- Provide the receiving port or city, state and ZIP code so the quotation can define its delivery scope.
Minimum order, production lead time, packing and shipping terms are confirmed with quotation. Request a USA Export Quote
Wear Parts for Australian Plants and Importers
Discuss metal shredder wear parts, crusher wear parts and ball mill liners for recycling, quarrying and mineral processing. Replacement fitment and material are reviewed for the machine and operating duty.
- Provide the part drawing or sample details with dimensions and weight units clearly identified.
- Describe feed abrasiveness, impact or contamination, current grade and observed wear or breakage.
- Include the receiving port or delivery city, state and postcode, plus any requested inspection or packing details.
Minimum order, production lead time, packing and shipping terms are confirmed with quotation. Request an Australia Export Quote
For Distributors and Importers
Practical guides written for the supply side of this business rather than for plant operators:
- How wear parts distribution works – which parts to carry first, pricing against the OEM, and building a record of the machines in your territory
- Stock planning and container economics – setting reorder points from total lead time, and why freight cost per part falls as a container fills
- Incoterms and documentation – FOB versus CIF, the documents a shipment needs, and packing heavy castings
- Auditing a foundry without visiting – remote due diligence, and how to structure a first order
- India or China? – where each is genuinely stronger, and how to decide with evidence
- Specifying parts across borders – units, drawings, tolerances and identification
- Calculating cost per tonne – the argument to use with your own customers
Distributor Questions
Do you supply distributors and traders, or only end users?
Both. We supply quarries, cement plants and recycling operators directly, and also distributors, importers and traders who resell into their own markets under their own commercial terms.
Which parts move best for a distributor holding stock?
Start with the machines your customers operate and their replacement demand. Shredder hammers and blow bars are wear consumables; the right stock mix depends on installed equipment, grade requirements and replenishment lead time.
Can you manufacture parts for machines we already supply?
Send the machine model, part reference and an approved drawing or sample details. We review geometry, material and tooling requirements before confirming whether the part can be manufactured. A brand reference alone does not establish fitment.
What quality documentation is supplied?
State the material certificate, hardness test locations, drawing checks and any witness inspection you require. The available records, acceptance criteria and documentation scope are confirmed with quotation before an order is placed.
How does a first order usually work?
Most supply relationships begin with a trial quantity so fitment and wear performance can be confirmed in service before committing to volume. Send the machines your customers run and we will advise which parts to trial first.
Do you quote FOB or CIF?
State your preferred shipping basis, destination country and receiving port. The available shipping basis, freight scope and responsibilities are confirmed with quotation.
Get a Quote
Send the parts you need, machine models, quantity and destination country. Minimum order, production lead time, packing and available shipping terms are confirmed with quotation.
Have drawings or worn-part photographs? Email them to achandra@melcocastings.com or choose Submit via WhatsApp below, then attach the files in WhatsApp. Include the machine make/model, quantity and destination country.